Between keeping your home comfortable and managing rainfall and plumbing issues, your Platte City home has a lot to handle. When your HVAC or plumbing system has a problem, you need a solution.
That’s when you call Buckner’s Heating, Cooling, & Plumbing. Our comprehensive home services are customized to the needs of Platte City residents. Our highly trained technicians are ready to tackle your biggest HVAC or plumbing issue.
For expert HVAC and plumbing services in Platte City, MO, call Buckner’s or contact us online.
Heating & Cooling
With winter temperatures in the 20s, your home needs a working heating system to maintain your comfort and keep your pipes from freezing. Buckner’s can handle heater and furnace repairs, no matter which brand. If you need a heating system replacement, we can help size a system to encompass your entire home. We also provide after-hours HVAC care in emergencies.
High temperatures and high humidity in the summer make a cooling system essential. If your AC goes down, call us right away. We can handle air conditioning repairs for any brand, including leaking coolant, failing motors, and more. We can also take care of your AC replacement needs.
Indoor Air Quality Solutions
Buckner’s also provides indoor air quality solutions. Air quality and humidity are important to manage, as they can affect your family’s health. We offer many air quality solutions, including:
- Air purifiers: These devices can help improve indoor air quality, directly affecting your health by eliminating contaminants from the air.
- Air cleaners: Air cleaners can also help improve indoor air quality and sleep.
- Humidifiers: Combat dry winter air with a humidifier, adding moisture to protect skin, hair, and your body.
- Dehumidifiers: In the summer, remove moisture from the air and help prevent mold and mildew growth. They also make your home more comfortable during hot days.
- Air scrubbers: Air scrubbers can help protect you against bacteria and viruses, eliminate odors, and extend the life of your HVAC system.
Home Plumbing Services
Fixing plumbing problems can be tricky, so it’s best to call the experts at Buckner’s. We can handle your indoor and outdoor plumbing system, including kitchen and bathroom plumbing, hydro jetting, sewer, and drain services. We also provide water treatment and leak detection services for a safe, efficient home. Each of these will help keep your home flowing in the right direction.
Water Treatment Services
If you need to remove contaminants and harsh chemicals from your home’s water supply, whole-home water filtration is the way to go. We ensure clean, safe water, as well as protecting plumbing appliances. Most importantly, we provide added peace of mind.
Leak Detection and Repair
Platte City lead detection and repair help to identify those pesky hidden leaks before causing too much damage. We use modern tools and techniques to pinpoint the problem and restore your home’s plumbing as quickly as possible.
Sewer and Drain Services
Water needs to flow out of your home as efficiently as is flows in. From routine camera inspections and cleaning, our professionals handle everything from minor clogs to major sewer line issues.
Water Heater Installation & Repair
When it comes to providing hot water, you need a working water heater. When your water heater breaks down, call Buckner’s for professional water heater repairs. Our team can repair and replace tankless and traditional water heaters. Hot water is essential for cleanliness and sterilizing surfaces, so call us immediately if you don’t have hot water.
Why Choose Buckner’s in Platte City?
At Buckner’s Heating, Cooling, & Plumbing, our team regularly trains on the newest technology and repair techniques to keep us ahead of the game. That’s how we can provide a 100% satisfaction guarantee to every customer. We spend time listening to our customers to fully understand the troubles they’re having so that we can get the job done right the first time. Every repair and installation is done with the highest quality materials to avoid future problems.
To experience superior HVAC and plumbing service, request an appointment in Platte City.
Buckner's Heating, Cooling, and Plumbing has completed 20 jobs in Platte City, MO between May 2026 and September 2026. The most recent job was on September 15, 2026.Recent Jobs and Reviews in Platte City, MO
Platte City, MO at a glance
Job Locations and Reviews
Responded to grinder pump malfunction in basement with suspected float or switch failure. Upon inspection, diagnosed faulty float switch assembly preventing proper pump operation. Removed defective green plastic float housing and replaced malfunctioning 2" Legend Valve component. Tested system operation to verify proper cycling and confirmed pump activated and deactivated correctly at appropriate water levels.
Installed approximately 70-80 feet of CSST flexible gas line, originating from a 1-inch gas nipple located near the furnace. Reduced the 1-inch nipple connection down to 3/4-inch and routed the gas line along ceiling rafters to the designated endpoint. Drilled through the floor structure, installed appropriate gas floor plate protection, and completed the installation with a gas shut-off valve for the stove connection.
Installed new gas line routing through basement and attic space to accommodate customer's new stove installation. Ran copper piping along existing structural framework and joists, securing lines properly to wooden beams with appropriate brackets and supports. Completed installation with all connections tested and verified for safe operation.
Completed installation of a 50-gallon gas water heater with thermal expansion tank to ensure proper system operation and code compliance. Replaced the existing frost-free outside hose bib with a new unit featuring a brass ball valve for improved shutoff control and freeze protection. Installed a 3/4-inch pressure reducing valve (PRV) to regulate incoming water pressure and protect plumbing fixtures and appliances from potential damage caused by excessive pressure. All connections were properly secured using copper and PVC piping with appropriate fittings, and the system was tested to verify proper pressure regulation and leak-free operation.
Completed plumbing maintenance visit addressing Schedule 40 PVC drainage piping and toilet fill valve system. Inspected and documented basement drainage pipe installation with proper mounting brackets and elbow fittings, confirming secure attachment and functional condition. Serviced toilet tank components including Fluidmaster fill valve assembly with dual float mechanism, verifying proper operation of water supply and flush system.
Completed routine plumbing maintenance inspection of residential property. Inspected HVAC-related copper piping with brass compression fittings in mechanical room, noting age-related discoloration on components but confirming system integrity. Examined bathroom vanity plumbing including sink drain assembly and PVC piping, verifying proper drainage and connection security with no leaks detected.
Completed commercial tankless water heater installation including comprehensive flu pipe re-piping and waterline re-piping. Installed new black PVC vent pipe through roof penetration with proper weatherproofing boot and flashing to ensure watertight seal at concrete roof deck. Configured vent termination with appropriate cap assembly featuring vented design for proper exhaust dispersal. All plumbing connections and gas lines were installed to code specifications, with system tested and verified operational upon completion.
Responded to service call for tankless water heater experiencing intermittent shutoff with no error code displayed. Upon arrival, removed access panels to perform comprehensive diagnostic inspection of unit's electrical components and internal systems. Examined wiring harness, connections, and control board for loose connections, corrosion, or signs of electrical failure. Inspected heat exchanger coils and found evidence of mineral buildup and condensation accumulation affecting unit performance. Cleaned heat exchanger fins and drainage components, removed debris from interior compartment, and verified proper drainage function. Tested all electrical connections and control sequences to ensure proper operation. Cycled unit through multiple heating cycles to confirm resolution of shutoff issue and verified stable operation without fault codes.
Responded to bathroom faucet dripping issue. Disassembled shower/tub control valve assembly, exposing corroded internal cartridge and brass components with visible rust buildup. Replaced faulty cartridge mechanism and reassembled valve stem with new hardware, restoring proper water shut-off function and eliminating the drip.
Responded to service call for main drain cleanout issue with access point located in garage area. Upon arrival, performed initial assessment and documented existing conditions showing water staining on floor surfaces near plumbing fixtures. Located main cleanout access point, a white vertical pipe situated among storage items in the utility space. Trip charge service completed as authorized. Customer advised that additional authorization required before proceeding with drain cleaning or repair work. Recommended follow-up service to address main line obstruction once approval obtained.
Installed a new 50-gallon gas water heater in basement utility area with thermal expansion tank to protect against pressure buildup in the closed plumbing system. Retrieved and installed extended warranty kit from supply house, upgrading the manufacturer's tank warranty from 6 years to 10 years. Connected all copper supply lines, yellow flexible gas line, and properly secured the thermal expansion tank to the wall with metal strapping, ensuring all components meet code requirements and safety standards.
Responded to reported leaking faucets and low water pressure issues in bathroom fixtures. Upon inspection, identified worn internal components and mineral buildup affecting performance. Replaced deteriorated Peerless brand faucet cartridge and addressed corroded drain assembly showing rust discoloration. Cleared aerators and supply lines to restore proper water pressure. Tested all fixtures post-repair to confirm elimination of leaks and verification of adequate flow rate.
Responded to a clogged bathroom sink complaint and successfully cleared the drainage obstruction. Inspected the P-trap assembly and drain line beneath the vanity, verified proper water flow restoration, and confirmed the plumbing system was functioning correctly with no leaks present.
Responded to callback for toilet leak that persisted following previous repair attempt. Upon inspection, discovered significant water damage and moisture infiltration in crawlspace area beneath bathroom, with extensive mineral deposits, efflorescence, and evidence of ongoing leak penetrating subfloor. Documented deteriorated plywood subflooring with advanced water staining, mold growth, and structural concerns from prolonged moisture exposure. Traced leak source to failed wax ring seal at toilet flange connection that was not properly addressed during initial service visit. Removed toilet, replaced defective wax ring with reinforced seal, inspected and secured flange mounting, reinstalled fixture with proper torque specifications, and tested for leaks under multiple flush cycles to confirm repair integrity.
Responded to a Bradford tankless water heater displaying a C2 error code in the basement of a 1996-built home. Diagnosed the issue as hard water scale buildup affecting the heat exchanger and flow sensors. Performed a complete descaling service by isolating the unit, connecting a submersible pump with descaling solution, and circulating the solution through the heat exchanger and water lines for approximately 45 minutes to dissolve mineral deposits. Flushed the system thoroughly with clean water, cleared the error code, and verified proper operation with restored hot water flow and temperature control. Additionally, installed a quarter-turn ball valve shutoff on a copper water supply line in the basement ceiling as requested to provide isolation capability for future maintenance. Tested all connections for leaks and confirmed proper valve operation. Unit returned to normal function with no error codes present upon completion.
Responded to reported toilet leak in bathroom. Upon inspection, discovered active water seepage at the base of the toilet where it meets the wooden floor, with visible moisture damage to surrounding wood planks. Removed toilet from floor flange to assess source of leak. Found compromised wax ring seal allowing water to escape during flushing. Removed failed wax ring, cleaned toilet flange and horn, and installed new wax ring seal. Reinstalled toilet, ensuring proper alignment with flange bolts and secure mounting to floor. Tested flush operation multiple times to verify leak was eliminated and seal is functioning properly.
Responded to tankless water heater displaying error code 11 indicating ignition failure. Attempted system reboot by disconnecting and reconnecting power supply, but fault code persisted upon restart. Diagnosed issue as no-ignition condition requiring further component inspection. Removed ignition assembly for examination and documented equipment condition with photos for service records.
Completed plumbing estimate for replacement of a 10-year-old tanked water heater located in basement. Assessed existing Freedom brand water heater system with expansion tank, copper supply lines, flexible braided connections, and PVC drain piping. Documented current installation including wall-mounted expansion tank with proper insulation, brass fittings, shutoff valves, and all plumbing connections to determine specifications and requirements for replacement unit.
Removed existing water softener system and installed new Matrix MX water treatment unit in basement utility area. Completed all new plumbing hookups to current code specifications, ensuring proper connections to existing water supply lines and drainage system. Delivered and loaded system with two bags of water softener salt for initial operation.
Responded to service call for malfunctioning water softener system in basement. Upon inspection, evaluated the existing water treatment equipment and associated plumbing connections including copper supply lines, PVC drainage piping, and electrical controls. Documented current system condition with photographs showing the water softener unit, control valve assembly, and integration with existing plumbing infrastructure. Assessed system performance issues and provided customer with options for repair versus replacement of the water conditioning equipment.