HVAC & Plumbing Services in Kansas City, MO

Responded to reported water leak in PEX piping system located in basement. Upon arrival, inspected the affected area and identified the source of the leak. Completed necessary repairs to restore proper water flow and prevent further water damage.

Completed installation of a 40-gallon gas water heater with thermal expansion tank in residential utility space. Removed existing unit and installed new water heater with proper venting, gas line connections, and copper supply piping with shutoff valves. Mounted red thermal expansion tank to accommodate thermal expansion in closed plumbing system per code requirements. All connections pressure tested and verified for proper operation and safety compliance.

Performed video camera inspection of main sewer line from building to street connection beneath driveway. Utilized RIDGID inspection equipment to assess pipe condition, integrity, and identify any potential issues such as cracks, blockages, root intrusion, or deterioration. Line was found to be in good operational condition with no immediate concerns noted.

Completed comprehensive whole-home plumbing inspection at customer's request with no prior reported issues. Thoroughly examined all accessible plumbing fixtures, water supply lines, drain systems, and visible piping throughout the residence. Inspected bathroom sink with single-handle chrome faucet, verified proper water flow and drainage function, and checked drain stopper operation. Evaluated bathtub and shower assembly including chrome fixtures, control valve, tub spout, overflow plate, and drain components for proper operation and potential leaks. All fixtures tested under normal operating conditions, with no deficiencies, leaks, or concerns identified during the inspection.

Responded to a kitchen faucet installation issue where the homeowner attempted a DIY replacement that resulted in a leak under the sink. Successfully completed the proper installation of a modern pull-down kitchen faucet with spray head attachment on a double-basin stainless steel sink, ensuring all connections were properly sealed and secured. Inspected and addressed the under-sink plumbing connections, verified the garbage disposal unit and drain assembly connections were leak-free, and tested the entire system to confirm proper water flow and drainage with no leaks present.

Responded to clogged basement floor drain. Upon arrival, found standing water in white PVC drain assembly with visible sediment buildup and brown staining around drain body and interior surfaces. Cleared blockage from drain line, restoring proper water flow and drainage function.

Replaced frost-free outside hose bib on exterior wall. Removed old valve assembly and installed new frost-free hose bib with shutoff valve featuring wheel-style handle. Ensured proper mounting to siding, verified secure connections, and tested system for proper operation and freeze protection functionality.

Replaced faulty exterior hose bibs in backyard area. Removed old fixtures, installed new frost-free sillcocks with proper sealing and verified water flow and shutoff functionality upon completion.

Relocated kitchen shut-off valve and replaced exterior spigot to improve accessibility and functionality. Plumbing connections were secured with appropriate fittings, and all fixtures were tested for proper operation and leak-free performance upon completion.

Completed comprehensive whole-home plumbing inspection as part of complimentary preventative maintenance program. Performed systematic evaluation of all accessible plumbing fixtures, supply lines, drainage systems, and water supply components throughout the residence. Inspected bathroom plumbing including toilet installation, water supply connections, shut-off valve operation, and flexible braided stainless steel supply line condition. Verified proper toilet mounting, seal integrity, and absence of leaks at connection points. Confirmed chrome shut-off valve functionality and appropriate water flow. Examined tile flooring surrounding fixtures for signs of water damage or moisture intrusion with no issues noted. Evaluated attic space plumbing infrastructure including black PVC drainage piping, pipe supports, and routing. Inspected pipe joints, elbow connections, and mounting brackets for secure installation and proper slope. Verified adequate pipe support and absence of stress points

# Plumbing Service Report During a kitchen sink installation, severely corroded water supply lines were discovered beneath the sink requiring immediate replacement. The existing copper piping showed significant deterioration at multiple connection points, posing a risk for future leaks and water damage. Removed the compromised copper supply lines and associated fittings from the under-sink area. Installed new copper pipe assembly with properly soldered joints and chrome-plated shut-off valves to ensure reliable water flow control. All connections were tested for leaks and proper operation. The replacement piping was routed through the wall cavity with appropriate insulation to prevent condensation and protect against temperature fluctuations. Work area was cleared of debris and all plumbing fixtures were left in proper working condition, ready for completion of the kitchen sink installation.

Completed plumbing inspection addressing multiple concerns throughout the property. Repaired basement faucet and installed two new cut-off valves to improve water control accessibility. Investigated wall opening to locate main water shut-off valve from street connection; assessed plumbing configuration and provided findings regarding main valve location. Inspected toilet supply line connections and whirlpool tub fixtures, verifying proper operation of jet controls and water supply components.

Responded to second-floor shower faucet repair in 20-year-old residential property. Upon inspection, removed and examined valve cartridge which exhibited significant mineral deposit buildup and corrosion inside the component. Replaced deteriorated cartridge, applied new thread seal tape to ensure proper seal, and reassembled faucet assembly to restore full functionality.

Installed customer-supplied shower valve assembly in bathtub enclosure. Completed all necessary plumbing connections using copper piping with soldered joints, integrated pressure regulator valve with gauge, and mounted chrome fixtures including single-handle control valve and tub spout with diverter. All components tested and operational upon completion.

Responded to reported water leak from shut-off valve in basement. Upon inspection, identified active leak at corroded shut-off valve assembly connected to water meter. The existing valve exhibited severe corrosion and oxidation on copper piping and brass fittings, with visible rust patina and mineral deposits indicating prolonged moisture exposure. Shut off main water supply and replaced failed shut-off valve with new brass ball valve. Removed deteriorated section of copper pipe showing advanced corrosion and greenish oxidation buildup. Installed new copper pipe section using proper soldering techniques and secured all connections with appropriate brass compression fittings. Tested system for leaks by restoring water pressure and verified proper valve operation. Confirmed no active leaks at valve assembly or connections. Documented pre-existing conditions showing significant corrosion throughout plumbing assembly and water staining on concrete surfaces.

Responded to emergency call for toilet flooding on second floor. Upon arrival, found significant water damage with standing water saturated into bathroom flooring and extending into adjacent carpeted area. Identified source of overflow, shut off water supply to affected fixture, and extracted standing water from impacted surfaces. Cleared obstruction causing toilet malfunction and restored proper drainage function. Verified system operation and confirmed no additional leaks present.

Completed preventive maintenance tune-up on outdoor AC unit located at side of home. Performed comprehensive system diagnostics using digital multimeter to verify electrical readings and system performance. Replaced dirty air filter per customer request to ensure proper airflow and system efficiency.

Installed customer-supplied chrome kitchen faucet with pull-down spray attachment on double-basin stainless steel sink. Completed installation, tested water flow and spray function to verify proper operation, and ensured all connections were secure with no leaks detected.

Responded to callback for small leak at newly installed copper pipe joint. Upon inspection, identified minor weeping at soldered connection on copper supply line where shut off valve was previously installed. Re-soldered joint using proper flux and lead-free solder to ensure watertight seal. Tested system under full pressure and verified no additional leaks present at valve connections or boiler drain installations. Confirmed all shut off valves and boiler drains installed during original service call remain fully operational for seasonal drainage of washing machine supply lines.

Successfully installed a new 40-gallon gas water heater in the basement utility area along with a thermal expansion tank to protect the plumbing system from pressure fluctuations. All copper supply lines were connected with proper fittings and joints, ensuring secure water flow to and from the unit. The installation was completed to code with all components properly positioned and secured in the mechanical room.