HVAC & Plumbing Services in Kansas City, MO

Responded to service call for reported water leak under bathroom sink and drainage issues. Upon inspection, examined white PVC P-trap assembly and drain connections for signs of leakage and obstruction. Assessed plumbing fixture mounting and verified proper installation of trap components and threaded connections. Inspected accessible crawl space and attic areas to evaluate potential water damage, checking ductwork, insulation, and structural framing for moisture intrusion or corrosion. Documented existing conditions including rust streaking on metal ductwork and fiberglass insulation status. Provided professional assessment and second opinion on plumbing system condition to assist with repair decision-making.

Completed basement bathroom plumbing installation including reinstallation of customer-supplied toilet with new wax ring seal and proper floor mounting. Removed existing pedestal sink and installed customer-supplied replacement unit with new faucet assembly, ensuring proper drainage connections and supply line installation with braided metal flex lines and PVC trap configuration. All fixtures tested for proper operation and leak-free connections upon completion.

Performed video camera inspection of sewer line and identified a compromised 1-foot section of cast iron pipe at the transition point to PVC. The inspection revealed a hole in the bottom of the cast iron section requiring repair via pipe lining or bursting method. Documented findings with photographic evidence of the interior plumbing system and exterior foundation access point for future repair work.

Replaced worn cartridges in two wall-mounted, two-handle faucets. Coordinated building water shutoff with 30-minute advance notice as required. Removed old brass valve cartridges showing significant tarnishing and wear, installed new replacement cartridges, and tested both faucet assemblies for proper operation and leak-free performance upon restoration of water service.

Responded to low water pressure concern related to refrigerator water line connection. Replaced deteriorated copper pipe supply line to restore proper water flow and pressure to the refrigerator ice maker and water dispenser. Tested system operation and verified adequate water pressure upon completion.

Responded to service call for clogged drain in residential property. Upon inspection, identified drainage issue originating from water heater area in utility space. Cleared blockage from drain line connected to water heater system, removing accumulated debris and sediment causing the obstruction. Verified proper water flow and drainage function through all affected lines. Tested system to ensure complete resolution of clogging issue with no standing water remaining.

Responded to callback for persistent leak under kitchen sink following previous service visit for clogged drain. Upon inspection, identified leak originating from dishwasher connection points and water supply line fittings beneath the sink cabinet. Tightened braided supply line connections, repositioned drainage components, and verified all plumbing connections were properly sealed and secured to eliminate the ongoing leak issue.

Responded to reported toilet leak in basement bathroom. Upon inspection, found extensive water staining on ceramic tile flooring surrounding toilet base, indicating chronic leakage. Inspected toilet tank interior and identified deteriorated flush valve flapper as primary source of leak. Tank showed significant mineral deposits and rust staining on interior surfaces, confirming prolonged water seepage. Replaced worn red rubber flapper assembly and inspected water supply line connection for integrity. Tested flush mechanism multiple times to ensure proper seal and verified no active leaking from tank or base connection. Documented pre-repair conditions showing floor discoloration and tank component deterioration.

Successfully installed new kitchen faucet with modern curved spout design over dual-basin stainless steel sink. Verified proper water supply connections, tested flow and drainage through existing P-trap plumbing assembly, and confirmed no leaks at all connection points.

Responded to reported leaking outside faucets at rear of property. Upon inspection, identified severely corroded copper supply pipe with visible horizontal crack and extensive green verdigris oxidation, indicating prolonged water exposure and material failure. Assessed exterior hose bib with green handle wheel mounted on wall above foundation, which was functional but compromised by failed supply line. Documented damaged copper piping showing significant deterioration requiring replacement to restore proper water delivery and prevent continued leakage.

Replaced deteriorated white PVC vent pipe on residential tanked water heater located in basement. Upon inspection, the existing vent showed signs of age-related degradation consistent with the 25-year-old home's mechanical systems. Removed old venting material and installed new properly-sized PVC vent pipe with appropriate fittings to ensure safe exhaust of combustion gases. Verified all connections were secure, properly pitched for condensate drainage, and compliant with current plumbing codes. Tested water heater operation post-installation to confirm proper venting function and customer satisfaction.

Replaced defective 2-inch P-trap assembly beneath bathroom sink with new PVC P-trap and fittings. Removed old trap configuration, cleaned drain connections, and installed new trap to proper code specifications. Verified proper drainage flow and sealed all connections to prevent leaks. All plumbing components are now functioning correctly with no drainage issues.

Completed comprehensive whole-home plumbing inspection including visual and operational assessment of all accessible fixtures and systems. Inspected bathroom shower system with ceiling-mounted showerhead assembly, verified proper water flow and drainage operation, examined tile surround and glass enclosure for signs of leaks or moisture damage. Conducted thorough examination of under-sink plumbing including supply line connections, shut-off valves, drain assemblies, and flexible supply hoses; noted minor mineral deposits and age-related discoloration on brass fittings but all components functioning within normal parameters. Performed visual and operational check of sump pump system as requested. All plumbing systems inspected found to be operational with no immediate repairs required at time of service.

Responded to kitchen water leak complaint with water appearing on floor during washer operation and slow drainage on garbage disposal. Upon inspection, identified water damage to cabinet floor beneath sink with significant staining and deterioration of wooden surfaces. Examined P-trap assembly, water supply lines, and drainage connections for source of leak. Investigated plumbing connections associated with washing machine discharge and garbage disposal drain line. Documented existing water damage and compromised cabinet materials resulting from moisture exposure. Addressed drainage issue affecting garbage disposal operation and traced potential leak sources in under-sink plumbing system.

Responded to service call for backflow preventer installation estimate. Upon arrival, assessed existing plumbing infrastructure in basement utility area, which included aged copper supply lines with multiple brass fittings, valves, and connection points showing oxidation and wear. Evaluated the current piping configuration running beneath floor joists to determine optimal placement and integration point for new backflow prevention device. Documented existing conditions including insulated copper lines, shutoff valves, and parallel black piping systems. Photographed the installation area showing the horizontal pipe runs, connection points, and available access for future installation work. Provided comprehensive estimate for backflow preventer installation including required materials, labor, and necessary modifications to integrate device into existing water supply system while maintaining proper clearances and accessibility for testing and maintenance requirements per local plumbing c

Replaced two exterior hose bibs on the building's outdoor walls. Removed old faucet assemblies, installed new frost-proof sillcocks with proper mounting brackets, and verified all connections for proper water flow and leak-free operation.

Responded to service call for sump pump inspection in basement of 23-year-old residence. Upon arrival, located and accessed sump pump system installed approximately 2 years prior. Performed comprehensive visual inspection of submersible pump unit, float switch mechanism, discharge piping, electrical connections, and basin condition. Observed pump positioned in standard circular plastic basin with ribbed walls, partially submerged in standing water with murky, greenish-brown appearance indicating normal sediment accumulation. Verified all mechanical components including float switch assembly, electrical wiring, discharge fittings, and clamps were properly secured and functioning. Checked water level and pump operation parameters. Basin and surrounding concrete floor showed typical age-related wear consistent with home's age. No immediate deficiencies, leaks, or operational concerns identified during inspection. System appears to be functioning as designed for groundwater removal and dra

Responded to a water leak issue in a half bath where the P-trap under the sink was actively leaking. Upon inspection, found the existing P-trap assembly had failed connections causing water discharge. Removed and replaced the defective P-trap with new white PVC components, ensuring proper alignment and secure compression fittings. Also inspected the dishwasher discharge line and kitchen sink trap assembly as requested, verifying proper drainage and connection integrity. All plumbing fixtures were tested for leaks and confirmed operational. Removed old corroded brass and copper fittings from the failed assembly. System is now functioning properly with no active leaks detected.

Responded to no hot water issue at kitchen sink faucet in 27-year-old home. Diagnosed faulty hot water supply line connection under sink affecting only the kitchen fixture while rest of house maintained proper hot water flow. Accessed plumbing connections beneath sink, identified and corrected the supply line issue to the 10-year-old pull-down style kitchen faucet with spring coil neck and single lever handle. Verified proper hot and cold water flow upon completion, with faucet now operating correctly at normal temperature and pressure.

Installed new AO Smith 50-gallon tanked water heater in finished basement, including all necessary copper and PVC plumbing connections, pressure relief valve with discharge line, and proper venting. Additionally, repaired malfunctioning outside faucet where valve stem was seized and unable to unscrew, restoring full operational functionality to exterior water supply.