HVAC & Plumbing Services in Kansas City, MO

Responded to a water meter leak requiring immediate attention. Excavated around the existing meter pit to gain access to the compromised meter set kit. Removed the old meter pit and meter assembly from the saturated excavation site. Installed a new meter set kit with proper copper fittings and connections, reinstalled the water meter, and set a new meter pit with lead seal. Upon initial assessment, emptied standing water from the old pit which refilled, confirming an active leak at the meter location. Completed backfill and compaction around the new meter pit installation. Advised that additional repairs may be necessary if future leaks develop downstream of the meter assembly.

Conducted comprehensive on-site assessment of basement sewer and drain line system to provide estimate for necessary repairs and replacements. Inspection revealed severely deteriorated concrete flooring around main sewer line penetrations, with extensive fragmentation and soil exposure creating potential structural and sanitary concerns. Evaluated condition of existing PVC drain lines, including vertical stack and angled lateral connections, noting age-related discoloration and wear patterns. Documented compromised floor conditions requiring concrete removal and replacement to properly access and service underground sewer lines. Assessed overhead plumbing infrastructure, water supply lines, and electrical routing to determine scope of work and potential conflicts during excavation and installation phases.

Responded to service call for main line drain cleanout. Upon arrival, accessed the main cleanout point located in floor area showing significant rust and corrosion around the drain opening. Performed mechanical cable cleaning of the main sewer line to remove blockage and restore proper drainage flow. Inspected underside plumbing configuration, noting existing P-trap assembly with white PVC connections to older cast iron piping system. Observed heavy rust staining and corrosion on surrounding surfaces indicating prolonged moisture exposure. Successfully cleared obstruction from main line and verified drainage restoration. Documented existing conditions including deteriorated floor surface and corroded plumbing components for service records.

Responded to service call for damaged sewer cleanout and pipe caused by fallen tree. Upon arrival, conducted visual inspection of the affected area and identified a broken cleanout cap and cracked pipe at ground level. Utilized camera inspection equipment to assess the extent of internal pipe damage and verify the structural integrity of the surrounding sewer line. Documented all findings with photographic evidence showing the damaged cleanout assembly and camera feed of pipe interior condition. Provided comprehensive repair quote for cleanout cap replacement and cracked pipe section repair to restore proper system functionality.

Installed ice maker supply line from appliance location to quarter turn shut-off valve in basement area. Routed copper piping through ceiling joists and secured with appropriate mounting brackets to wooden framing members. Connected braided stainless steel flex line from supply pipe to appliance connection point, ensuring proper fittings and leak-free connections throughout the installation.

Conducted on-site assessment for Toto toilet installation to replace existing fixture. Evaluated current toilet condition, noting rust staining and mineral deposits on underside of bowl and plumbing connections, and documented existing flush valve assembly and mounting configuration. Provided estimate for complete toilet replacement, taking advantage of manufacturer's promotional offer for new Toto unit installation.

Performed routine maintenance on tankless water heater system located on ground floor, completing scheduled flush procedure and preventive plumbing maintenance inspection. Serviced plumbing assembly including brass valves, compression fittings, and flexible supply lines connected to the water heating unit mounted on wooden platform. All connections, ball valves, and distribution piping inspected and confirmed secure with proper operation of control system and circulation components.

Responded to service call for low water pressure at main bathroom sink and loose faucet handle in kitchen. Inspected bathroom faucet and identified restricted flow due to clogged aerator and debris buildup in supply lines. Disassembled faucet assembly, cleaned aerator screen, and flushed supply lines to restore proper water pressure. Tested flow rate and confirmed adequate pressure restoration. Proceeded to kitchen where faucet handle was found to be loose due to worn mounting hardware. Tightened handle set screw and verified secure operation of handle mechanism. Documented pre-repair and post-repair conditions with photographs showing water flow at bathroom sink. All fixtures tested and left in proper working order.

Responded to service call for toilet wax seal replacement in residential bathroom. Upon arrival, removed toilet from floor flange to access deteriorated wax ring. Inspection revealed heavily corroded closet bolts and mounting hardware requiring replacement due to advanced rust and oxidation. Cleaned toilet base mounting surface and floor flange, removing old wax residue. Installed new wax ring, replaced corroded closet bolts with new stainless steel hardware, and properly reset toilet to floor flange. Verified secure mounting, tested flush operation, and confirmed proper seal with no leaks detected.

Responded to a main drain cleanout service request in the garage area. Upon arrival, accessed the cleanout point located in a utility space with multiple plumbing lines and mechanical components. The drain system extended 68 feet deep from the access point. Performed thorough cable snaking of the main drain line to remove blockages and restore proper flow. The work area showed evidence of previous drainage issues with sediment accumulation around the cleanout basin and floor surfaces. Successfully cleared the line and verified proper drainage function. Cleaned work area and secured all access covers upon completion.

Completed preventative plumbing maintenance service that was previously documented but not performed in October 2025. Inspected Delta shower fixture assembly and A.O. Smith water heater installation, verified proper operation of all plumbing connections, and documented current system conditions to fulfill owed maintenance obligation.

Responded to a clogged drain issue in the basement utility area. Upon arrival, accessed the floor drain and sump pit, which showed significant rust staining and drainage obstruction. Removed the perforated metal strainer cover, cleared the blockage from the drain opening and PVC discharge line, and restored proper water flow. Tested the system to ensure complete drainage functionality before completing the service call.

Responded to service call for toilet with water constantly running and tank not refilling after flushing. Upon inspection, diagnosed faulty flapper valve causing continuous water flow into bowl and preventing proper tank fill. Replaced worn red rubber flapper valve and adjusted float valve assembly to restore proper fill level and stop mechanism. Tested flush cycle multiple times to verify tank fills completely and running water issue resolved.

Provided estimate for water heater replacement in basement location. Evaluated existing Bradford White automatic storage water heater installation with copper piping and PEX connections. Presented customer with options for either an 80-gallon conventional storage tank water heater or tankless water heater system. Documented current equipment specifications and photographed existing installation including water connections, venting configuration, and available workspace for replacement unit.

Completed preventive plumbing maintenance inspection on residential property. Inspected exposed plumbing infrastructure in attic/crawl space, including PVC drainage piping configuration and copper supply lines, verifying proper installation and mounting. Performed toilet maintenance service, including plunging to ensure proper drainage and flush operation. All plumbing systems found to be functioning properly with no leaks or deficiencies noted.

Responded to service call for installation of shut-off valve for refrigerator water line in kitchen. Upon arrival, inspected existing plumbing configuration and identified appropriate connection point for new valve installation. Successfully installed quarter-turn shut-off valve on cold water supply line to provide dedicated shutoff capability for refrigerator ice maker and water dispenser. Tested valve operation and checked for proper sealing with no leaks detected upon completion.

Responded to kitchen sink leak in 50-year-old home. Upon inspection, found deteriorated drain assembly with visible staining and residue buildup around connection points between chrome drain basket and PVC tailpiece. Assessed P-trap configuration and identified leak source at threaded connections where metal components meet plastic piping. Disassembled drain assembly, cleaned all connection surfaces, replaced worn gaskets and seals, and reassembled with proper torque specifications. Verified all connections were secure and tested system under full water flow to confirm leak was eliminated. All plumbing hardware restored to proper working condition with no active leaks detected upon completion.

Completed annual preventative maintenance on tankless water heater system, performing comprehensive flush procedure to remove mineral deposits and scale buildup from heat exchanger. Inspected gas valve assembly, burner components, and all electrical connections for proper operation. Verified gas line connections, confirmed proper venting, and tested unit functionality to ensure optimal performance and efficiency for continued reliable hot water delivery.

Completed installation of Rinnai RX160 condensing tankless water heater with 96% efficiency and 9.0 GPM capacity in basement utility area. Removed and properly disposed of existing conventional water heater, capping old gas lines and venting as required. Installed approximately 15 feet of 2-inch PVC piping for combustion air intake and exhaust venting with appropriate termination. Ran hot and cold water supply lines to unit using copper piping. Installed gas supply line using black iron pipe with required tee fittings, 90-degree elbows, sediment trap, and emergency shut-off valve for code compliance. Routed condensate drain line to existing floor drain with proper air gap and venting below unit to prevent trap siphoning. Verified dedicated 110-volt electrical outlet was present at installation location. Tested unit operation by running multiple fixtures throughout the house to confirm proper flow rate, temperature control, and system functionality. All work completed to manufacturer sp

Replaced defective ABS kitchen drain piping in basement due to improper pitch, belly in line, and leaking elbow. Removed affected drain sections and installed new PVC drain piping with proper grade and adequate support to prevent future sagging. Connected new drain to existing trap arms using approved fittings. Installed customer-supplied garbage disposal unit at kitchen sink. Added boiler drain valve at main water shut-off location to facilitate future system servicing and drainage. Diagnosed and repaired loud squealing noise occurring during garbage disposal operation. Secured all piping with appropriate hangers and brackets throughout crawl space and basement areas. Tested all drainage for proper flow, verified leak-free connections at all joints and fittings, and confirmed full functionality of garbage disposal and drain system upon completion.