HVAC & Plumbing Services in Kansas City, MO

Responded to a same-day plumbing service call to address water flow and fixture operation concerns. Inspected bathroom sink faucet assembly and verified proper water flow and drainage function. During comprehensive system evaluation, identified frost accumulation on brass valve fitting and associated piping in mechanical space, indicating potential temperature differential or insulation issue requiring monitoring. Documented conditions with photographic evidence for service records. All plumbing fixtures operating within normal parameters at time of inspection.

Successfully installed customer-supplied sump pump system in basement sump basin. Mounted pump unit with appropriate PVC discharge piping, including shutoff valves for maintenance access, and secured all electrical connections. System tested and verified operational, with proper water level activation and discharge flow through newly installed piping configuration.

Responded to service call for two separate plumbing issues in residential bathrooms. Successfully replaced defective cartridge in master shower valve assembly to restore proper temperature control and water flow. Addressed leaking sink in hall bathroom by inspecting drain assembly and supply line connections beneath vanity, identifying source of leak at PVC coupling joint, and performing necessary repairs to eliminate water seepage and restore watertight seal.

Replaced frost-free outside hose bib with new unit featuring cross-handle valve assembly mounted to exterior wall. Removed existing drywall around laundry area to access and replace failed laundry box with new code-compliant unit including pre-installed water hammer arrestors. Replaced leaking 1/2" PEX fittings at main supply lines and re-established connections to laundry box supply lines. Conducted pressure testing to verify all connections were leak-free and system was functioning properly.

Responded to reported pilot light failure on tanked water heater in basement. Upon inspection, discovered heavily corroded thermocouple and pilot assembly preventing proper flame sensing and gas valve operation. Replaced failed thermocouple, cleaned pilot orifice, and tested ignition system for proper function. Verified pilot light remains lit and burner cycles correctly with sustained flame.

Successfully installed customer-supplied toilet in bathroom with beige tile flooring. Installation included new wax ring seal and reconnection of water supply line to ensure proper function and prevent leaks. Toilet was tested for proper flush operation and verified no water leakage at base or supply connection upon completion.

Responded to no-hot-water call for GE tanked water heater located in basement mechanical room. Upon arrival, performed visual inspection and diagnostic testing of unit. Found gas supply intact and pilot light assembly functioning properly. Verified burner ignition sequence and observed proper flame pattern with characteristic blue flames at base indicating efficient combustion. Checked thermocouple operation and gas valve functionality. Restored unit to full operational status with burner firing correctly in circular pattern. Verified adequate draft and proper venting. Unit tested and confirmed producing hot water at appropriate temperature settings.

Responded to service call for replacement of two bathtub lift/lock drain plugs. Upon arrival, found that previous handyman attempt had resulted in damaged hardware, with the tool grab points broken off due to corrosion. Assessed the corroded drain assemblies and determined that standard removal tools could not engage the damaged fittings. Despite customer having replacement parts on hand, existing drain plugs could not be successfully extracted due to extensive corrosion and compromised hardware from prior removal attempt. Documented existing conditions showing significant rust staining and mineral deposits around drain openings in white porcelain fixtures.

Responded to service call for toilet replacement estimate at residential property. Upon arrival, assessed existing standard white porcelain toilet in bathroom equipped with accessibility features including padded grab bars. Documented current fixture condition and surrounding bathroom configuration, noting gray vinyl plank flooring and adequate clearances. Evaluated installation requirements for potential replacement, including existing water supply line connection and floor flange accessibility. Photographed existing toilet and bathroom layout to provide accurate estimate for new fixture installation. Recommended replacement options based on bathroom dimensions and accessibility needs.

Performed scheduled maintenance on HydroJet tanked water heater located in basement utility area. Conducted comprehensive inspection of unit including water connections, pressure relief valve, and drainage system. Verified proper operation of all components and documented current condition of installation with photographic records.

Responded to service call for broken toilet bowl in bathroom. Upon arrival, inspected toilet and found damaged tank-to-bowl mounting hardware. Removed deteriorated rubber cushion bolt assembly from floor. Assessed toilet tank interior condition, noting mineral buildup and corrosion on internal components. Documented existing flush mechanism with float ball system. Completed necessary repairs to restore toilet to proper working condition.

Replaced existing sump pump with new 1/3 HP unit in residential sump basin. Installation included proper electrical connections, discharge piping configuration, and verification of float switch operation to ensure reliable water removal and basement flood protection.

Responded to a clogged drain call at a basement bathroom sink in a split level home. Upon arrival, assessed the vanity-mounted sink with undermount basin and confirmed blockage in the drain line. Removed obstruction from the P-trap assembly beneath the sink, verified proper water flow through the drain system, and tested all plumbing connections for leaks. System restored to full functionality with water draining freely through the fixture.

Conducted site assessment for water heater and mechanical equipment relocation in laundry room area. Documented existing plumbing infrastructure including supply lines, drain system with P-trap configuration, and current water heater connections. Evaluated wall cavity access point and existing pipe routing to determine feasibility and requirements for proposed relocation project.

Responded to service call for sump pump activating but immediately shutting off. Upon inspection, found existing sump pump system in unfinished basement with corroded pump motor showing significant age-related deterioration, rust spots, and surface oxidation. Diagnosed pump failure due to worn motor components preventing proper operation cycle. Performed system evaluation of basin, discharge piping, and electrical connections. Replaced failed sump pump unit with new assembly, ensuring proper float switch operation and motor function. Tested system through multiple activation cycles to verify continuous operation and proper water discharge through existing PVC piping. Confirmed electrical connections secure and system operational.

Responded to kitchen sink clog complaint and accessed cabinet area beneath sink to inspect drainage system. Upon examination, found P-trap assembly and associated PVC drain lines showing signs of blockage. Cleared obstruction from drain line, ensuring proper water flow through P-trap configuration and downstream piping. Tested system operation to verify drainage functioning correctly. Advised on proper sink usage to prevent future clogs.

Responded to service call for clogged kitchen sink. Upon arrival, conducted inspection of plumbing system and documented existing conditions of water heater and associated piping in mechanical room, noting signs of corrosion on copper lines and aging infrastructure. Successfully cleared kitchen sink blockage and restored proper drainage function.

Responded to service call for multiple plumbing concerns including exterior faucet leaking into the house, washing machine supply line leak, and moisture at cast iron to PVC connection on main plumbing stack. Performed comprehensive inspection of all reported areas. Examined exterior hose bibb and traced water intrusion path. Inspected washing machine supply valves with red and blue handles mounted in wall box, noting aged flexible braided supply lines and surrounding PVC drainage system. Assessed main drain stack connection where cast iron transitions to PVC piping, documenting moisture concerns at joint. Photographed all problem areas including pipe connections, shut-off valves, drainage components, and structural conditions for documentation and repair planning. Provided assessment of existing conditions and discussed repair options with homeowner prior to proceeding with any corrective work per customer request.

Performed comprehensive maintenance service on residential tanked water heater, including complete tank flush to remove sediment buildup and extend equipment lifespan. Inspected all plumbing connections, pressure relief valve, and heating elements for proper operation. Verified water pressure readings at outdoor spigot connection point and confirmed all safety labels and warning indicators were clearly visible and intact on unit.

Completed preventive plumbing maintenance inspection in basement utility area. Inspected exposed plumbing lines, including copper piping and gas lines running along ceiling joists and wall framing. Verified proper support and routing of all visible water supply and drain lines in unfinished space. Checked for signs of leaks, corrosion, or deterioration on accessible piping systems. Confirmed clearances around HVAC ductwork and electrical panel to ensure no interference with plumbing infrastructure. All plumbing components found in satisfactory operating condition with no immediate repairs required.